[ 1] J. Jørgensen, K. Carneiro and L. Madsen, The Scanning Tunneling Microscope and Surface Characterisation, Nanotechnology 4, 152-158 (1993)
[ 2] J.F Jørgensen., L. Madsen, K. Carneiro and K. Conradsen (1994) Hysteresis Correction of STM Images, JVST B, 12(3), 1702-04
[ 3] J. F. Jørgensen, L. L. Madsen, J. Garnaes, K. Carneiro, K. Schaumburg, Calibration, drift elimination and molecular structure analysis, JVST B, 12(3), 1698-1701 (1994)
[ 4] J. F. Jørgensen, N. Schmeisser, J. Garnaes, L. L. Madsen, K. Schaumburg, L. Hansen, P. Sommer-Larsen. (1994) Dynamics and structure of selfassembled organic molecules at the solid-liquid interface, Journal of Surface & Coating Technology 67, pp. 201-11
[ 5] J. Garnaes, N. B. Larsen, T. Bjørnholm, M. Jørgensen, K. Kjaer, J. Als-Nielsen, J. F. Jørgensen, J. A. N. Zasadzinski. (1994) Langmuir-Blodgett Films of a Functionalized Molecule with Cross-sectional Mismatch between Head and Tail, Science 264, 1301-1304
[ 6] K. J. Stout, P. J. Sullivan, W. P. Dong, E. Mainsah, N. Luo, T. Mathia, H. Zahouani (1994), The development of methods for the characterization of roughness on three dimensions. Publication no. EUR 15178 EN of the Commission of the European Communities, Luxembourg,
[ 7] G. Barbato, K. Carneiro, D. Cuppini, J. Garnaes, G. Gori, G. Hughes, C. P. Jensen, J. F. Jørgensen, O. Jusko, S. Livi, H. McQuoid, L. Nielsen, G. B. Picotto, G. Wilkening Scanning tunneling microscopy methods for roughness and micro hardness measurements, Synthesis report for research contract with the European Union under its programme for applied metrology, 109 pages European Commission Catalogue number: CD-NA-16145 EN-C, Brussels Luxemburg (1995).
[ 8] G. Barbato., K. Carneiro, D. Cuppini, J. Garnaes, G. Gori, G. Hughes, C. P. Jensen, J. F. Jørgensen, O. Jusko, S. Livi, H. McQuoid, L. Nielsen, G. B. Picotto, G. Wilkening (1996) International intercomparison of STM, JVST B 14(2) 1531-35
[ 9] J. Garnaes ,L Nielsen, K. Dirsherl, J. F. Jørgensen, P. E. Lindeloff, J. B. Rasmussen . (1998) Two-dimensional nanometer scale calibration based on one-dimensional gratings. Appl. Phys. A 66, pp. 831-35
[ 10] J.F. Jørgensen, C.P. Jensen, J. Garnæs, (1998) Lateral Metrology using Scanning Probe Microscopes, 2D pitch standards and Image Processing. Appl. Phys. A 66, pp. 847-52
[ 11] H. Edwards, J.F. Jørgensen, J. Dagata, Y. Strausser, J. Schneir. (1References.htm998) Influence of Data Analysis and Other Factors on the Repeatability of Vertical Scanning-Probe Microscope Calibration Measurements. JVST B 16, 2
[12] J.S. Villarrubia (1997) Algorithms for Scanned Probe Microscope, Image Simulation, Surface Reconstruction and Tip Estimation, J. Nat. Inst. Stand. and Technol. 102, 435-454
http://ois.nist.gov/jres/102/4/j24vil.pdf
[13] P. M. Williams, K. M. Shakesheff, M. C. Davies, D. E. Jackson, C. J. Roberts (1996) Blind reconstruction of scanning probe image data, JVST B 14(2), 1557-62.
[14]W.C. Oliver, G.M. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiment”, J. Mater. Res., vol. 7, pp. 1564-1583, 1992.
[15] D.J. Shuman, “Atomic force microscope indentation measurement software”, Conference proceedings - NanoScale II, Physikalisch-Technische Bundesanstalt (PTB), Braunschweig, Germany, March, 2004.
[16] D. Shuman, Computerized Image Analysis Software for Measuring Indents by AFM, Microscopy and Analysis, page 21-23, May 2005.
[17] N. A. Stillwell and D. Tabor, Proc. Phys. Soc. London, London 78, 169 (1961).
[18] K. L. Johnson, K. Kendall and A. D. Roberts, Surface energy and the contact of elastic solids, Proc. R. Soc. Lond. A. 324, 301-313 (1971).
[19]I. N. Sneddon, The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile, Int. J. Engng. Sci., 3 47-57 (1965).
[20] M. Radmacher, Measuring the elastic properties of biological samples with the AFM, IEEE Eng. Med. Biol. Mag., 47-57 (1997).
[21] J. Domke and M. Radmacher, Measuring the elastic properties of thin polymer films with the atomic force microscope, Langmuir 14, 3320-3325 (1998)
[22] A. Janshoff, M. Neitzert, Y, Oberdöfer and H. Fuchs. Force Spectroscopy of Molecular Systems – Single Molecule Spectroscopy of Polymers and Biomolecules, Angew. Chem Int. Ed. 39, 3212-3237 (2000).
[23] Alan Stuart and J. Keith Ord Kendal. “Advanced Theory of Statistics”, Charles Griffin & Company Ltd. London, 1987, ISBN 0-825264-285-7
[24] John C Russ, “The Image Processing Handbook”; CRC Press; Fourth Edition, 2002, ISBN: 978-0849311420
[25] B. V. Derjagin, V. M. Muller, and Yu. P. Toropov, J.Colloid Interface Sci., 53 314, 1975
[26] A. Godi, J. Grønbæk, K. Mohaghegh, P. Klit, and L. De Chiffre, “A New Rig for Testing Textured Surfaces in Pure Sliding Conditions”, Tribology Letters 50(3) 397-405 (2013).
[27] A Godi, A. Kühle, and L. De Chiffre, “A new procedure for characterizing textured surfaces with a deterministic pattern of valley features””,Meas. Sci. Technol. 24(8) 085009 (2013)
[28] K. S. Friis, A. Godi and L. De Chiffre, "Characterization and robust filtering of multifunctional surfaces using ISO standards”, Meas. Sci. Technol. 22 125101 (2011)
[29] ISO 16610-30:2010 Geometrical Product Specification – Filtration – Robust profile filters: Basic concepts
[30] ISO 16610-31:2010 Geometrical Product Specification (GPS) - Robust profile filters: Gaussian Regression filters
[31] J. Seewig, “Linear and robust gaussian regression filters”,J. Phys: Conf. Ser. 13 254-257 (2005)
[32] S. Brinkmann, H. Bodschwinna and H.W. Lemke, “Accessing roughness in three-dimensions using Gaussian regression filtering”,Int. J. Mach. Tools Manuf. 41 2153–61 (2001)
[33] W. Zeng, X. Jiang, P. Scott, S. Xiao and L. Blunt, “A fast algorithm for the higher order linear and nonlinear Gaussian regression filter”,Proc. Euspen 9th int. conf. 356-359 (2009)
[34] : “Fast algorithm of the robust Gaussian regression filter for areal surface analysis”, W. Zeng, X. Jiang, and P.J. Scott, Meas. Sci. Technol. 21, 55108 (2010)
[35] ISO 16610-41 Geometrical Product Specification (GPS) – Filtration – Part 41: Morphological profile filters: Disk and horizontal line segment filters
[36] NPL Softgauges project: http://resource.npl.co.uk/softgauges/SP_Feature_Para.htm
[37] J.D. Whitehouse “Handbook of Surface and Nanometrology”, Second Edition, 2011, Boca Raton, FL: CRC Press/Taylor and Francis, ISBN 978-1420082012
[38] H.S. Nielsen, “The ISO Geometrical Product Specification Handbook”, ISO/Danish Standards 2012, ISBN 978-87-7310-721-8 (and -5 and -2).
[39] Reference Software for roughness measurement, http://www.ptb.de/en/org/5/51/517/rptb_web/wizard/greeting.php
[40] ISO 4287-1997 Geometrical Product Specification - Surface Texture: Profile method – Terms definitions and surface texture parameters
[41] ISO 3274:1996 Geometrical Product Specification (GPS) – Surface Texture: Profile method – Nominal characteristics of contact (stylus) instruments
[42] ISO 13565-1:1997 Geometrical Product Specification (GPS) – Surface texture: Profile method; Surfaces having stratified functional properties – Part 1: Filtering and general measurement conditions
[43] ISO 13565-2:1997 Geometrical Product Specification (GPS) – Surface texture: Profile method; Surfaces having stratified functional properties – Part 2: Height characterization using the linear material ratio curve
[44] ISO 13565-3:1996 Geometrical Product Specification (GPS) – Surface texture: Profile method - Characterization of surfaces having stratified functional properties – Part 3: Height characterization using the material probability curve
[45] ISO 11562:1996 Surface texture: Profile method – Metrological characteristics of phase correct filters / ISO 16610-28:2008 Filtration: Linear profile filters - Gaussian filters
[46] N. Kofod, J. Garnaes, and J.F. Jørgensen, Method for lateral calibration of Scanning Probe Microscopes based on two dimensional transfer standards, Proc. 4th Seminar on Quantitative Microscopy QM 2000, Eds. K. Hasche, W. Mirandé, G. Wilkening, PTB-F-39, ISBN 3-89701-503-X, p. 36-43 (2000)
[47] K.L. Johnson, K. Kendal, and A.D. Roberts, “Surface energy and the contact of elastic solids”, Proc. B. Soc. Lond. A. 324, pp 301-313 (1971)
[48] B. Capella, G. Dietler, “Force distance curves by atomic force microscopy” Surf. Sci. Rep. 34 (1999) 1-104
[49] Yujie Sun, Boris Akhremitchev, and Gilbert C. Walker, “Using the Adhesive Interaction between Atomic Force Microscopy Tips and Polymer Surfaces to Measure the Elastic Modulus of Compliant Samples”, Langmuir, 20 (14), pp 5837–5845 (2004)
[50] Dong Wang, So Fujinami, Hao Liu, Ken Nakajima, and Toshio Nishi, “Investigation of True Surface Morphology and Nanomechanical Properties of Poly(styrene-b-ethylene-co-butylene-b-styrene) Using Nanomechanical Mapping: Effects of Composition”, Macromolecules, 43 (21), pp 9049–9055 (2010)
[51] Dong Wang, So Fujinami, Ken Nakajima and Toshio Nishi, “True Surface Topography and Nanomechanical Mapping Measurements on Block Copolymers with Atomic Force Microscopy”, Macromolecules, 43 (7), pp 3169–3172 (2010)